Twitter Delicious Facebook Digg Stumbleupon Favorites More

Alfa Romeo Spider


Alfa Romeo Spider is highly aesthetic, at times, Spyder, known by many experts said Julia. Disc brakes with four-wheel independent suspension front and rear coil broke in the same way as Julienne.

Alfa Romeo Spider is a classic, has successfully produced a long time, only minor cosmetic modifications to the elevator and parking.Equipped with the same engine as the Sprint GTV 1600, Alfa Romeo Duetto Spider 109bh cylinder production (as it is commonly known) had five speeds and disc brakes.

The chassis was Giulia 105-series of sports-absorbing crumple zones, innovation has eliminated the time.

After two years of production Alfa Romeo Duetto Spider Veloce 1800cc has been updated to 1750, was born and delivered to the Duet.New Alfa Romeo Spider Veloce 1750 no significant change in cosmetic changes last Spider, aesthetics (and is) very popular.

Major changes in 1750 were the electronic speed, suspension and brakes. If Duetto 1750 Veloce, was eventually replaced in 1750 by Fast 2000.In 2000 he was introduced in 1970 Alfa Romeo Spider with another variant, 1300 Junior, sophisticated model and lower level. 560 and 17 200 were subsequently added to the vehicle tail comb to improve the results of extensive experience in the wind tunnel to reduce drag.

In addition, two-seater has been done to Spider, Spider, four easily. Other amendments added in the early 80s with black bumpers, made for the car, even with the evolution of the grill and spoiler.

Alfa Romeo 159


Alfa Romeo 159 is an exclusive sedan combining refined Italian style with the "elegant sportiness" of Alfa Romeo. The Alfa Romeo 159 Sportwagon on the other hand combines the style, performance and handling of a genuine sports car with the flexibility of use and luggage space versatility of a prestigious station wagon.

The versions exhibited offer two new Euro 5 compliant engines which will be available from the beginning of April: the 1.75 liter 200 HP TBi engine and the 2.0 liter 170 HP JTDM engine. In detail, the Alfa Romeo 159 is fitted with the new 1.75 liter TBi engine (Euro 5) - maximum output 200 HP from 4750 to 5500 rpm and maximum torque of 320 Nm at 1400 rpm - giving it a maximum speed of 235 km/h and acceleration of 0 to 100 km/h in barely 7.7 seconds.

The powerful Alfa Romeo 159 sedan is offered in the TI sporting version, featuring lowered geometry, bigger tires, 19 inch alloy rims, miniskirts and large aluminum brakes with red calipers. So, a very determined-looking car with a decidedly "ground-hugging" look. Inside, the TI environment is recognizable from the shaped sports seats in perforated leather with the Alfa Romeo logo stitched in red, plus the steering wheel with sports grip and the gear knob covered in leather with red stitching.

The internal coverings are black and the insignia are in "brushed dark aluminum". The same impression of sportiness appears in the instrument panel graphics, the pedals and the aluminum scuff plate with TI logo. Finally, this particular version comes with high-end equipment including triple-zone climate control, VDC system with Electronic Q2, Blue&Me Nav GPS and entertainment system, Bose Hi-Fi system and Cruise Control.

Next to this car, the public can admire an Alfa Romeo 159 Sportwagon equipped with the new 2.0 liter 170 HP JTDM engine (Euro 5). With this engine, the car can reach 216 km/h and takes 9 seconds to accelerate from 0 to 100 km/h. The version displayed at Geneva is a Sport which is differentiated from the outside by the exclusive 18 inch alloy rims with the new "Turbine" design.

Inside, the eye is caught by the sports steering wheel with radio commands, the gear knob covered in leather with black stitching and the new sports seats covered in leather. Giving a further impression of sportiness, the head lining, the parcel shelf and the pillar fairings are black, while the badges are in "brushed aluminum" and the instrument panel employs "sporty" graphics. Finally, the equipment (standard and optional) offered on this car is very high-spec: triple-zone climate control, Cruise Control, VDC system (with Electronic Q2), Bose Hi-Fi system, GPS system (with telephone and voice commands), and Visibility Pack (rain, mist and twilight sensors).

Bugatti Veyron Fbg par Hermes


The Bugatti Veyron Fbg par Hermès associates Bugatti's technical performance with the expertise of Hermès and its craftsmen. In partnership with Hermès, designer Gabriele Pezzini has married the distinctive Hermès style to the legendary Bugatti Veyron 16.4, magnifying the car's personality.

This remarkable car features an array of exceptional characteristics: the innovative alliance of a technologically advanced engine, delivering 1001 horsepower, with an understated yet uncompromising silhouette reflecting the high performance capacities of state-of-the-art engineering and design, and above all, the pleasure these inspire in every Bugatti owner.

The fascination exerted by this sports coupé, capable of reaching 407 km/h, is due in large part to its unique alliance of the very finest motor-racing technology with comfortable handling for everyday driving.

The 16-cylinder "W" configuration engine is fed by four turbochargers and features 64 valves, generating 1001 horsepower at 6000 rpm. The engine draws on its 8-litre displacement to deliver a maximum torque of 1250 Newton-metres between 2200 and 5500 rpm. With full-time all-wheel drive, the car's phenomenal power produces breath-takingly dynamic handling, with acceleration from 0 to 100 km/h in a mere 2.5 seconds. The Bugatti Veyron 16.4 benefits from aeronautical and aerospace technologies, making it the fastest production car ever made. The car also features a braking system designed to deliver unprecedented powers of deceleration, establishing a new industry benchmark. The carbon-fibre discs provide brake pressure of up to 180 bars, combined with eight-piston monobloc callipers and titanium pistons fitted with fine steel heads and ceramic heat protectors. Apply the brakes at speeds above 200 km/h, and the rear wing acts as an airbrake, positioning itself at an angle of 113 degrees in less than 0.4 seconds, augmenting the Bugatti Veyron's already impressive stopping power. The airbrake increases negative lift at the rear of the car to 300 kg, enhancing the braking torque on the rear axle. At 400 km/h, emergency braking will bring the sports car to a complete halt in less than 10 seconds.

This, the world's most fascinating car, has pushed back the limits of physical engineering to offer a completely new sensation for driver and passenger alike. But it has also adopted a radically different stance to that of other sports cars: its features and finish are sure to impress the most demanding clientele. Hermès and designer Gabriele Pezzini have lavished attention on the interior and exterior of this exceptional car, to create the new Bugatti Veyron 16.4: the Bugatti Veyron Fbg par Hermès.

Ascari KZ1


The Ascari KZ1 is a super car costing around 235,000 British Pounds introduced in 2003. It fast acceleration allows it to reach 60 mph in 3.9 seconds from stand still point. It top speed can reach up to 200 mph. It is a very easy super car to drive and you can possibly handle it better than most other super cars. The steering talk to you like it should and you can feel it as though it part of your own body.

2010 Honda CBR1000RRA

The word is out: the remarkable Honda CBR1000RRA takes open-class performance to a whole new level of excitement. Although it's physically small for amazingly crisp ¬handling, the CBR1000RRA retains the rider-friendly ergonomics that make it a great street bike, too. Honda's innovative Electronically Controlled Combined ABS — the first Anti-lock Braking System (ABS) designed specifically for the unique demands of sportbikes — gives the CBR1000RRA superb braking capability. And for 2010 a redesigned flywheel means even smoother power delivery and improved performance from the compact, fuel-injected engine.

Engine/Drivetrain

Liquid-cooled DOHC 16-valve 999cc four-stroke inline four-cylinder engine features bore and stroke dimensions of 76 mm x 55.1 mm.

Sixteen-valve cylinder head features 30.5 mm intake and 24 mm exhaust valves with a 12.3:1 compression ratio for efficient combustion and high horsepower.

Titanium intake valves with double-spring control allow for high rpm and increased performance.

Intake ports use new shot-peening technology for improved power and torque.

Forged-aluminum thinner high-strength pistons featuring molybdenum coating result in reduced friction.

Lightweight nutless, cold forged connecting rods.

Dual Stage Fuel Injection (DSFI) delivers the precise fuel/air mixture to the engine for efficient combustion and crisp performance at high engine rpm.

46 mm throttle bodies feature Denso injectors with lightweight valving for faster reaction time and 12 holes per injector to optimize mixture atomization, combustion efficiency and power.

Auto-enriching system is integrated into programmed fuel injection (PGM-FI) module, eliminating the need for a manual choke.

Small and light ECU features two 3-D fuel injection maps per cylinder/two 3D ignition maps per cylinder pair creating an ideal fuel mixture for superb rideability.

MotoGP-derived twin ram-air system allows high volume (9.7-litre airbox) of cool air for incredible engine performance.

High-capacity radiator with twin cooling fans.

Maintenance-free automatic cam-chain tensioner.

Starter gears located on the right side for increased lean angle.

Radical clutch design not only provides slip in throttle-off conditions, but also provides positive lock under power.

Extremely compact exhaust system incorporates a catalytic converter and control valve in mid-muffler that reduces rear bodywork size and significantly improves mass centralization, reducing roll and yaw inertia.

Durable #530 O-ring–sealed drive chain.

Chassis/Suspension

Lightweight Hollow Fine Die-Cast twin-spar aluminum frame utilizes MotoGP technology.

MotoGP-derived Honda Electronic Steering Damper (HESD) .

43 mm inverted aluminum-slider cartridge front fork features spring preload, rebound and compression damping adjustability.

Exclusive Unit Pro-Link Rear Suspension is patterned after Honda's world-championship-winning

MotoGP RC211V. The upper shock mount is contained within the swingarm rather than being mounted to the frame. With no top frame mount for the shock, this unique system reduces negative suspension energy from being transmitted into the frame, allowing optimum frame rigidity and improved rideability out of corners. It also permits repositioning of the fuel tank lower and closer to the machine's centre of mass.

The CBR1000RRA comes with the world's first Electronically Controlled Combined ABS for sportbikes. This innovative system combines the benefits of anti-lock brakes and linked front and rear brakes to improve both braking control and safety — all without interfering with cornering ability or other aspects of sport performance. The system measures rider input on both the front brake lever and rear brake pedal (plus data from other sensors), then using sophisticated electronics and two separate power units, generates up to the maximum braking force on both wheels while also preventing wheel lockup. An innovative stroke simulator helps to maintain the same sort of feel at the brake lever and pedal as you're used to. Combine this with the small size and weight of the components, and you have one amazing system. Full braking performance immediately available, giving you that extra peace of mind.

Front brake system features radial-mounted four-piston calipers and 320 mm floating discs, and rear brake system uses a 220 mm disc with a single-piston caliper for exceptional stopping power.

Front discs with 72 holes of four different diameters for light weight and improved feel.

Super-light aluminum-alloy hollow-spoke wheels feature race-spec 3.5 x 17-inch front and 6.0 x 17-inch rear dimensions.

Centrally mounted 17.7-litre fuel tank is positioned low in the frame, increasing mass centralization and allowing for a more compact design.